8 sec / WORKSHOP DEMO
Prepare the toolhead
The opening clip shows the toolhead lever being operated before disassembly. Complete the preparation checks above before following the demonstration.
Open video ↗THE ARMODTECH WORKBENCH
A closer look at replacing your hotend.
Short, practical videos. One step at a time.
01 / VIDEO GUIDE
A hands-on demonstration on the Bambu Lab toolhead shown in the videos. Check your printer’s model-specific instructions and replacement-part compatibility before starting.
8 sec / WORKSHOP DEMO
The opening clip shows the toolhead lever being operated before disassembly. Complete the preparation checks above before following the demonstration.
Open video ↗8 sec / WORKSHOP DEMO
Gently remove the toolhead front cover to expose the hotend area.
Open video ↗11 sec / WORKSHOP DEMO
With the hotend cool, carefully pull off the black silicone sock. Set it aside for reassembly.
Open video ↗13 sec / WORKSHOP DEMO
Open the hotend retaining mechanism and carefully remove the hotend, as shown. Do not force a part that does not release.
Open video ↗19 sec / WORKSHOP DEMO
Seat the replacement hotend in position, then close the retaining mechanism. Check that the assembly is securely held.
Open video ↗10 sec / WORKSHOP DEMO
Slide the silicone sock back over the nozzle area and check that it is properly seated.
Open video ↗8 sec / WORKSHOP DEMO
Align the front cover and gently refit it. Check that it sits correctly before proceeding.
Open video ↗11 sec / SCREEN WALKTHROUGH
After reassembly, restore power and select the nozzle material and diameter that match the part you actually installed. The screen recording shows hardened steel 0.4 mm as an example—not a setting for every nozzle.
Open video ↗READY FOR YOUR NEXT PRINT
Confirm that the hotend and covers are secure, then follow your printer’s recommended checks before printing.
Explore our parts